accessories for temperature control
matching plug-and-play components for temperature control
OEM Peltier Modules BPM
Air and plate cooler/heater as ideal plug-and-play solution for fast and effecitve temperature control of objects or air voluminas.
Go to product page
OEM Output Filter BOF-2
High power LC-Filter as ideal plug-and-play solution for effective regulation of heating or Peltier elements with DC output voltages.
Go to product pageconnecting cables
BAT-CC-200
Universally applicable connecting cable for BELEKTRONIG benchtop temperature controller
Two connecting wires for fan and load, each
Four connecting wires for temperature sensors
The connecting cable can also be used to connect BELEKTRONIG built-in temperature controller with our plate and air cooler
Cable length [m]: 2
BAT-CC-PM-140
Connecting cable to connect BELEKTRONIG benchtop temperature controller with plate or air cooler
Cable length [m]: 2
peltier elements
BAT-PE-40-01
Dimensions [mm]: 40 x 40 x 3.8
QMax [W]: 82.1
ΔTMax [K]:72.5 (at Thot-side = 25°C)
Permissible TMax in continuous operation [°C]: 150
UMax [V]: 15.7
IMax [A]: 7.8
Cable length [mm]: 400
Minimal cycling stability (60 s on / 60 s off) [cycles]: 60.000
BAT-PE-20-01
Dimensions [mm]: 20 x 20 x 2.5
QMax [W]: 20.9
ΔTMax: 72.5 K (at Thot-side = 25°C)
Permissible TMax in continuous operation [°C]: 150
UMax [V]: 15.7
IMax [A]: 2.2
Cable length [mm]: 150
Minimal cycling stability (60 s on / 60 s off) [cycles]: 60.000
pt1000 temperature sensors
BAT-TS-K260
Type of sensor: PT1000 class B
Measurement range [°C]: -200...260
Dimensions of the sensor [mm]: Ø2,18 x 4,75
Cable length [mm]: 300
Connection type: 2 wire
BAT-TS-K540
Type of sensor: PT1000 class B
Measurement range [°C]: -75...540
Dimensions of the sensor [mm]: Ø2,18 x 6,35
Cable length [mm]: 300
Connection type: 2 wire
BAT-TS-D500
Type of sensor: PT1000 class B
Measurement range [°C]: -70...400
Abmessungen des Sensors [mm]: 4,1 x 2,1 x 0,9
Cable length [mm]: 10
Connection type: 2 wire
BAT-TS-TO92-1
Type of sensor: PT1000 class B
Measurement range [°C]: -50...150
Dimensions of the sensor [mm]: 4.2 x 4.1 x 2.6
Cable length [mm]: 12
Connection type: 2 wire
BAT-TS-S200
Type of sensor: PT1000, 1/3 DIN
Measurement range [°C]: -50...200
Dimensions of the sensor [mm]: Ø3 x 30
Cable length [mm]: 2000
Connection type: 4 wire
BAT-TS-S400
Type of sensor: PT1000, 1/3 DIN
Measurement range [°C]: -50...400
Dimensions of the sensor [mm]: Ø3 x 30
Cable length [mm]: 2000
Connection type: 4 wire
BAT-TS-S200-8
Same sensor as BAT-TS-S200 but equipped with cable plug 8polar for direct connection with BELEKTRONIG benchtop temperature controllers
Type of sensor: PT1000, 1/3 DIN
Measurement range [°C]: -50...200
Dimensions of the sensor [mm]: Ø3 x 30
Cable length [mm]: 2000
Connection type: plug 8polar
ntc temperature sensors
BAT-TS-N250
Type of sensor: NTC
Measurement range [°C]: -55...250
Dimensions of the sensor [mm]: Ø0,8 x 1,4
Cable length [mm]: 65
Connection type: 2 wire
analogue temperature sensors
BAT-TS-LM60-1
Type of sensor: LM60
Measurement range [°C]: -40...125
Dimensions of the sensor [mm]: Ø5 x 5
Cable length [mm]: 14
Connection type: 3 wire
Suitable for connection with sensor inputs 3, 4 and 5 of hte BELEKTRONIG built-in temperature controllers
heating elements
BAT-HR-TO-**
Die hier dargestellten Heizelemente zeigen lediglich einige mögliche Beispiele. Die Auswahl der passenden Heizelemente nach Abmessungen und Innenwiderstand erfolgt stets entsprechend Ihrer individuellen Kundenanforderungen.
Heizwiderstand in Gehäuse: TO-220
Abmessungen [mm]: 16 x 10 x 3 bzw. 15 x 10 x 4,5
Belastbarkeit [W]: maximal 20 bzw. 50 (je nach Ausführung)
Cable length [mm]: 10
Anschlussart: 2 Leitungen
BAT-HR-**
Heizwiderstand in Aluminiumgehäuse
Abmessungen [mm]: 88 x 47,5 x 24,1
Belastbarkeit [W]: maximal 100
Cable length [mm]: 14
Anschlussart: 2 Leitungen
BAT-HF-**
Heizfolien selbstklebend
Heizleistung meist deutlich geringer als bei Heizwiderständen
Verschiedene Abmessungen
Leitungslänge [mm]: 100 ... 200
Anschlussart: 2 Leitungen