Contact
Solutions
solutions
ServicesSupport

OEM PELTIER MODULE AIR AND PLATE COOLER/HEATER

Plate cooler / heater BAT-BPM-P140
Air cooler/-heater BAT-BPM-A140
Exemplary set 1: Benchtop temperature controller with PLate cooler/heater and matching accessories

description

function

The BELEKTRONIG OEM Peltier modules are used for temperature control of objects or air in experimental setups or analytical instruments. With cooling capacities up to 164 W and heating powers up to 240 W, they are the ideal solution for fast and effective temperature management. The high temperature stability is achieved in combination with the built-in and benchtop temperature controllers of BELEKTRONIG. Optimized for barely audible operating noise, the Peltier modules generate no additional noise pollution in the laboratory.

Air cooler/heater: For temperature control of air in closed chambers such as incubators, furnaces, microscopes, control cabinets, electronic housings, etc.

Plate cooler/heater: For temperature control of objects that can be connected directly to the surface, such as biosensors, test setups of optics, printed circuit boards, etc.

key features

  • Cooling capacity up to 164 W
  • Heating capacity up to 240 W
  • Barely audible operating noise
  • High temperature stability up to ±0.002°C
  • Fast reaching of setpoint temperature
  • Versatile and flexible
  • Optimized for operation with BELEKTRONIG built-in and benchtop temperature controllers

configurations

OEM Peltier Module BAT-BPM -
A140 (Air)
P140 (Plate)
Achievable temperature difference to ambient temperature in cooling mode [°C]
30
36
Permissible lowest temperature [°C] / Permissible highest temperature [°C]
0 / 85
-25 / 120
Maximum cooling capacity at 0°C temperature difference [W]
164
164
Maximum cooling capacity at 0°C temperature difference [W]
240
240
Rated voltage [V] / Maximum permissible rated voltage [V
24…27 / 32
24…27 / 32
Maximum current consumption [A]
8
8
Maximum operating noise outer fan [dB(a)]
26
26
Maximum operating noise inner fan [dB(a)]
19
-

technical Data

Dimensions and Conditions of Operation

Dimensions (L x W x H)
270.5 x 200 x 180.2 mm³ (Air cooler/heaterr)
270.5 x 200 x 108.2 mm³ (Plate cooler/heater)
Weight
∼4.5 kg
Operating temperature
10...45°C
Relative humidity
0...80 %, not condensating

Scope of Delivery

Peltier module
Connecting cable
Allen screws M6 x 20
For mounting of Air cooler/heater
Matching connector plugs 8polar
On request
Matching stand foot
Plate cooler/heater only

downloads

Datasheet (german / english)
DO YOU HAVE QUESTIONS ABOUT OUR PELTIER MODULES? CONTACT US NOW!